Lowongan Kerja Alstom Power Generation

Lowongan Kerja Alstom Power Generation : The company is the world leader in integrated power plants for the production of electricity and air quality control systems. Alstom has solutions for all energy sources (coal, gas, nuclear, fuel-oil, hydropower, wind) and is a leader in innovative technologies for the protection of the environment (reduction of CO2 emissions, elimination of pollutant emissions).
The Group is also developing CO2 capture processes and has integrated this technology in pilot plants in Germany and USA.

Alstom is a global leader in the world of power generation, power transmission and rail infrastructure and sets the benchmark for innovative and environmentally friendly technologies. Alstom builds the fastest train and the highest capacity automated metro in the world, provides turnkey integrated power plant solutions and associated services for a wide variety of energy sources, including hydro, nuclear, gas, coal and wind, and it offers a wide range of solutions for power transmission, with a focus on smart grids. The group employs, 93,500 people in around 100 countries, and had sales over € 20.9 billion in 2010/11.

Alstom supplies rolling stock, transport infrastructure and signalling, maintenance equipment and global rail systems. From the very first TGV* delivered in 1978 to the AGV, the fourth generation of very high speed trains, Alstom has developed a world leading position in this market sector. Alstom’s technological advances allowed the company to achieve the world rail speed record at a speed of 574.8 km/h on 3 April 2007.

Electrical grids need to deliver more energy, with greater flexibility, and in a more complex environment. Alstom is leading the way with solutions to make grids ‘smarter’

Now Alstom Indonesia is opening position with qualification below

Key Account Manager Power Generation (Ref. TMP-10-004-KAM)

Job Responsibility
• Full leading role in developing all of ALSTOM Grids orders in the Power Generation segment in Indonesia.
• Plan, identify, target and lead sales process with full support of ALSTOM Grid s units worldwide.

Qualification
• Bachelor degree in Electrical Eng with sales capability.
• Min. 10 years exp. in commercial/business development related to Power Generation Market in Indonesia.

Project Manager (Ref. PCM-11.013-PM)

Job Responsibility
• Plan, manage and deliver project or multiple projects involve supply of High Voltage Protection and Digital Control Systems from transfer from sales through to final site acceptance.
• Ensure the project is delivered on time and within allocated budget.

Qualification
• Diploma in Electrical Eng with 5 to 10 years exp. as project manager.
• Competency in Substation Automation, Digital Comm/ System and Protection System.

System Software Engineer (Ref. PCM-11-010-SSE)

Job Responsibility
• Review customer s specification and ALSTOM offer on Substation Automation projects and prepare base design for approval.
• Configuration, integration and internal validation of system solution, site acceptance test and commissioning.

Qualification
• Diploma degree in Electrical Eng.
• Exp. as Automation design Engineer (Prefer knowledge in Electrical switch gear).
• Competency in Substation Automation, Digital Communication System and Protection System.

Designer E-Cad (Ref. ITS-10-032.DCAD)

Job Responsibility
• Carry out eng. design in Installation and Civil work/Structure systems or protection system discipline for transmission projects/tenders.
• Carry out factory and site testing to validate implementation of design.

Qualification
• Diploma degree in Electrical Power/ Mechanical/ Civil Eng.
• Able to operate CAD software (AutoCAD, Eng Base and Micro Station).
• Knowledge in Design Standards and calculation software.

Primary/ Secondary Design Engineer (Ref. ITS-11-008-PSDE)

Job Responsibility
• Carry out eng. design in primary/ secondary design area (conventional/automation substation design, schematic diagram protection, control and measurement).
• Carry out factory and site testing to validate implementation of design.

Qualification
• Bachelor degree in Electrical Eng. or skills in electromechanical technique with 3 to 5 years exp.
• Able to operate CAD software (AutoCAD, Eng Base and Micro Station).
• Strong knowledge in Non-SAS/ SAS Substation s protection, control and measuring, Power Grid, HV Substation design, UGC/ OHL design procedures and tools.

GIS Supervisor (Ref. (S)-11-001-GISS)

Job Responsibility
• Deliver successful execution of the projects and maintain the services according to quality of products and services in Gas Insulated Substation (GIS) products.

Qualification
• Bachelor degree in Electrical Power Eng.
• 3 years exp. as service engineer, particularly in transmission and distribution for utility sector.
• Knowledge and capability in Electrical Distribution System and Procedure.
• Background in High/low voltage switchgear and transformer.

Testing Specialist (Ref. UTR-10-060-TES)

Job Responsibility
• Perform testing based on correlated international standard & contractual customer requirements.
• Ensure transformer can be release from factory fulfilling the reliability & contractual specs.

Qualification
• Bachelor in Electrical Eng. Or equivalent by exp. with min. 10 years in testing of power transformer 275 kV or higher Voltage.
• Understanding in industrial approach, final control equipment and industrial standards of electro technical products.


HR Business Partner (Ref. SSC-11-005-HRBP)

Job Responsibility
• Administer all HR processes and activities in particular unit.
• Responsible for Employee relation; Legal Compliance; Labor Relation; Internal Communication; Compensation & Benefit; Recruitment; People Development; HRIS.

Qualification
• Bachelor s degree in Human Resources Management, Psychology or equivalent.
• Experience 3 to 5 years in Personnel Management or HR as an assistant/generalist.
• Awareness of HR activities (Employee relations, training, benefits, recruitment, payroll).

Sr. Mechanical Design Engineer (Ref. UTR-10-070-SMDE)

Job Responsibility
• Create concepts & drawings for cost effective, high quality, reliable design of Power Transformer

Qualification
• University degree major in Mechanical Eng. with Min. 5 years exp. in transformer mechanical design Eng.
• Specific knowledge in Structural & steel material properties; Wind & Seismic forces analysis & properties; Welding design & manufacturing codes.
• Understand slim basic design analysis software and inventor/ 30-CADTools.

Production Supervisor-Night Shift (Ref. UTR-11-015-PSPV)

Job Responsibility
• Manage the department based on ISO & quality, time & manufacturing requirement by high efficiency. Working at night shift.

Qualification
• Bachelor in Electrical Eng. with 10 years exp. & master in transformer production process & equipments.
• Familiar with ISO 9001, EHS & ISO 14001

After Sales Service Engineer (Ref. UTR-11-029-ASSE)

Job Responsibility
• Management of customer complaints and after sales issues within internal company.

Qualification
• Bachelor degree in Electrical Eng. with 3 years exp.
• Good level awareness of customer requirements and production standards.

Metal Parts Component Inspector (Ref. UTR.11-031-MPCI)*

Job Responsibility
• Follow up, inspect and control the quality and completeness of metal parts component in order to deliver high quality and reliable transformer metal parts product.

Qualification
• Min. graduate from technical high school or Fresh graduate from Eng.
• Knowledge in Mechanical transformer basic design & tank fabrication process.
• Familiar and understand AutoCAD, Inventor and 3D-CADTools.

Project Leader (Ref. UTR-11-039-PML)

Job Responsibility
• Manage, conduct, co-ordinate the project team within costs, deadline and quality conditions with the objective to deliver the systems as defined in contract.

Qualification
• Bachelor degree in Electrical Eng. with 3 years exp. as Project Engineer in energy field.
• Knowledge in High voltage, switchyards/substation and transformer.

Electrical Engineer (Ref. UTR-11-043-EE)

Job Responsibility
• Develop design of power transformer in line with customer specification considering the optimization of cost & quality.
• Develop drawings & documents for manufacturing or other process; Provide technical support in execution stage.

Qualification
• Electrical Eng. Degree major in Power with exp. in transformer design.
• Knowledge in Transformer, transmission & protection; CAD tools & spread sheet calculation; Basic programming is advantage.
• Fresh graduate are welcome to apply.

Please apply online by sending us your complete resume application before 27 August 2011 to :

recruitment.id@alstom.com
and use the job reference as your email subject.


Lowongan Bank DKI 2011